It's exciting to announce the addition of "Bud Racing" products to our range of suspension that Shock Treatment offers.
Not only will we be bringing in the Suspension Parts from Bud we will also be stocking the Pipes, Silencers, Piston Kits, Cylinder Heads and all the shiny goodies!Bud Racing
WP 4CS Adjustable Compression Bases
One of the main sources of evil within the 4CS fork is the mechanism that separates the adjusting system at the fork cap into separate rebound and compression legs. This hampers the control of the fork and promotes the possibility of cavitation.
The new Race Tech Suspension adjuster provides compression adjustment at the bottom of the fork on both legs allowing the caps to be converted back to standard rebound adjustment.
The boost in performance is instantly recognisable and very much appreciated by all riders that have made this change
New Tools from Race Tech
Damping Rod Holding Tool TFHD 01
Some Damping Rods are difficult to remove because they spin. Making a special tool for each model can be a pain. This simple tool is a tapered aluminium rod. With the tap of a hammer, the taper wedges into the ID of most Damping Rods.
You may be surprised with the holding power! Many forks come apart easily, but this inexpensive tool is great to have when you need it.
Shock Body Holding Tool TFSH 58
The Shock Body Holding Tool is ideal for clamping WP and Race Tech GS-3 reservoirs. Can be sleeved to clamp any tube smaller than 58mm including Fork Tubes, Shock Bodies etc. Has four pinch bolts and can be used in a press for additional holding power. Machined from Billet Aluminium.
WP 4CS Fork Cap Tool TFCW PS38048
This is a dual purpose tool for the WP 4CS Fork. This tool allows you to properly remove the fork cap as well as the compression base at the bottom of the fork
Showa TAC Fork Cap Tool TFCT 3602
This pin spanner is a dual purpose tool for the Showa SFF Air TAC Fork. This tool allows you to properly remove the fork cap as well as the compression base at the bottom of the fork